Sign up for our weekly email to stay on top of the latest news and insights!
Aston Martin has initiated a safety recall for certain 2025 Vanquish vehicles due to a potential issue with the vacuum pump that could affect braking performance. This defect may lead to reduced brake assistance, making the pedal feel harder and potentially increasing stopping distances.
Key Highlights
- Affected Vehicles: 178 units of the 2025 Aston Martin Vanquish manufactured for the U.S. market.
- Defect Description: The vacuum pump may fail to generate vacuum, causing loss of power brake assist.
- Safety Risk: Increased risk of a crash due to reduced braking performance.
- Remedy: Free software update to the ESP module.
- No Incidents Reported: Aston Martin has received no reports of accidents or injuries.
- Owner Notification: Letters to be mailed to affected owners.
Vehicle Details and Production
The recall targets 2025 Aston Martin Vanquish passenger cars equipped with spark ignition fuel systems. These vehicles were produced between August 14, 2024, and June 26, 2025. An estimated 1% of the potentially involved vehicles may have the defect. Globally, Aston Martin manufactured 419 additional Vanquish vehicles for other countries that also require the same update, but the U.S. focus is on the 178 units.
The issue affects the ESP module software, which is responsible for vehicle stability and braking support. All 25MY Vanquish models need this software update to ensure proper functionality.
Defect Explanation
Under specific conditions, the vacuum pump does not generate sufficient vacuum for the brake booster. This results in a hard brake pedal and reduced pedal travel, which can extend stopping distances. When the brakes engage, the pedal may pulse as the ABS system compensates for the low vacuum—this is normal operation by design.
The root cause is a Diagnostic Trouble Code (DTC) P050FFF, which deactivates the vacuum pump. This code triggers on the first drive after ignition if vacuum is less than -200 mbar and either wheel speed exceeds 1.2 km/h or engine speed reaches at least 400 rpm, with both conditions lasting more than 5 seconds. Importantly, this does not occur during normal driving.
If the problem arises, a warning message and brake warning symbol may appear on the instrument panel. The brake pedal will feel noticeably harder, and the DTC may be logged in the ESP module.
Investigation Chronology
Aston Martin began investigating after an initial concern was raised on a vehicle in the Netherlands. Subsequent reports from two more Vanquish vehicles showed the same brake issue. Analysis revealed the common DTC P050FFF across all cases, which prevents vacuum generation.
The company’s Technical Review Group (TRG) met regularly to evaluate data. The Critical Concerns Review Group (CCRG) assessed potential risks related to brake vacuum loss. Finally, the Recall Committee determined that a defect exists in the affected population, posing a safety risk, and approved a voluntary recall for all involved vehicles.
Remedy and Correction
Aston Martin will provide a software update to the ESP module at no cost to owners. This update removes the unnecessary DTC P050FFF, which was carried over from an external OEM application and is not required for the Vanquish. The updated calibration, used in 26MY vehicles, ensures the vacuum pump operates correctly at startup.
The repair procedure takes up to 3 hours, including any additional software updates. Owners should take their vehicle to an authorized Aston Martin dealer. The condition was corrected in production for 26MY vehicles starting on July 10, 2025.
For reimbursement, Aston Martin covers all costs with no time limit. Claims can be submitted to the specified address in New York.
Recall Schedule and Notifications
Aston Martin plans to notify all affected owners via mail. Dealer notifications are scheduled between certain dates, with owner remedy letters following. The recall is phased, and VINs will become searchable soon after initiation. No consumer advisories recommend avoiding driving or parking outside, as the issue is addressed through the software fix.
This recall, identified as NHTSA Recall No. 25V532 and manufacturer number RA-06-2074, underscores Aston Martin’s commitment to vehicle safety. Owners of 2025 Vanquish models should check their VIN and contact customer service at 1-888-923-9988 for details.
Subscribe Today!
Sign up for our weekly eNewsletter and get a free copy of our quarterly digital magazine.
