New Assessment and Testing Methodology for Vehicle Type Approval (3 of 3)
ADELANTO, Calif. — The following is the third of a three-part series produced by Carlos Lujan Tutusaus, Senior Manager Homologation,…
Search Results for applus
New Assessment and Testing Methodology for Vehicle Type Approval (2 of 3)
ADELANTO, Calif. — The following is the second of a three-part series produced by Carlos Lujan Tutusaus, Senior Manager Homologation,…
New Assessment and Testing Methodology for Vehicle Type Approval (1 out of 3)
ADELANTO, Calif. — The following is the first of a three-part series produced by Carlos Lujan Tutusaus, Senior Manager Homologation,…
Target Setting and Test Metrics Definition for Redundant Braking Systems Development for CAVs (3 of 3)
ADELANTO, Calif. – The following is the third of three articles by: Fabio Squadrani, Senior Manager, Braking Systems of Applus…
Target Setting and Test Metrics Definition for Redundant Braking Systems Development for CAVs (2 of 3)
ADELANTO, Calif. – The following is the second of three articles by: Fabio Squadrani, Senior Manager, Braking Systems of Applus…
Methodology to Set targets for a redundant Braking System
ADELANTO, Calif. – The following is the first of three articles by: Fabio Squadrani, Senior Manager, Braking Systems of Applus…
Brake NVH Development Process (3 of 3)
Source: Applus IDIADA ADELANTO, Calif. – The following is the third of three Technical Corner pieces by Antonio Rubio, Project Manager,…
Brake NVH Development Process Improvement (2 of 3)
Source: Applus IDIADA ADELANTO, Calif. – The following is the second of three Technical Corner pieces by Antonio Rubio, Project Manager,…
Brake NVH Development Process Improvement (Part 1 out of 3)
Source: Applus IDIADA ADELANTO, Calif. – The following is the first of three Technical Corner pieces by Antonio Rubio, Project Manager,…
Adaptive Cruise Control (ACC) – Objective Metrics and Performance (Post 3 of 3)
TROY, Mich. — This is the final of three articles by Bernat Ferrer, Manager Chassis and Active Safety at Applus…
Adaptive Cruise Control (ACC) – Objective Metrics and Performance (Post 2 of 3)
TROY, Mich. — This is the second of three articles by Bernat Ferrer, Manager Chassis and Active Safety at Applus…
Adaptive Cruise Control (ACC) – Objective Metrics and Performance
TROY, Mich. — This is the first of three articles by Bernat Ferrer, Manager Chassis and Active Safety at Applus…
Bending and Torsion of a Vehicle Body under Brake Judder Loads (Part 2 out of 2)
TROY, Mich. — This is the second of two articles by Juan Jesús García, PhD, Product Manager, Braking Systems at…
Brake Judder Load on Bending and Torsion of a Vehicle Body (Part 1 out of 2)
TROY, Mich. — This is the first of two articles by Juan Jesús García, PhD, Product Manager, Braking Systems at…
AI as a Means of Detecting Brake Noise (Part 3 of 3)
TROY, Mich. — This is the third of three articles by Fabio Squadrani, Senior Manager, Braking Systems in Applus IDIADA on the…
AI as a Means of Detecting Brake Noise (Part 2 of 3)
TROY, Mich. — This is the second of three articles by Fabio Squadrani, Senior Manager, Braking Systems in Applus IDIADA…
Brake Noise Detection Using AI (Part 1 of 3)
TROY, Mich. — This is the first of three articles by Fabio Squadrani, Senior Manager, Braking Systems in Applus IDIADA…
Considerations about the Interaction between Brake Creep Groan and Squeal in Disc Brakes (Part 4 of 4)
Troy, Mich. — This is the fourth article in a series of four by Narcís Molina, Project Manager, Braking Systems…
Relationship Between Brake Creep Groan and Squeal in Disc Brakes (Part 3 of 4)
Troy, Mich. — This is the third article in a series of four by Narcís Molina, Project Manager, Braking Systems…
Investigation of Relationship between Brake Creep Groan and Squeal in Disc Brakes (Part 2 of 4)
Troy, Mich. — This is the second article in a series of four by Narcís Molina, Project Manager, Braking Systems…
Relationship of Brake Creep Groan and Squeal in Disc Brakes (Part 1 of 4)
Troy, Mich. — This is the first article in a series of four by Narcís Molina, Project Manager, Braking Systems…
Implementation of Regenerative Brake Testing on Dynamometer (Part 4 of 4)
This is the fourth installment of a four-part article by: Kenneth Mendoza, Project Engineer, HiL Systems, Electronics in Applus IDIADA…
Simulation of Regen Braking on a Dyno (Part 3 of 4)
This is the third installment of a four-part article by: Kenneth Mendoza, Project Engineer, HiL Systems, Electronics in Applus IDIADA…
Program Set for Next Week’s EuroBrake 2021
Stansted, U.K. — EuroBrake and FISITA have released the final version of the program for next week’s EuroBrake 2021 –…
Dynamometer Simulation of Regenerative Braking (Part 2 of 4)
This is the second installment of a four-part article by: Kenneth Mendoza, Project Engineer, HiL Systems, Electronics in Applus IDIADA…